What does DLE mean in GENERAL
DLE stands for Data Link Escape. It is an out-of-band flow control system used in computer networks and telecommunications systems. DLE is a control character used to escape from data transmission, commonly known as an "escape code". It is usually sent as the first byte of a frame and acts like a switch, directing the associated device or protocol to temporarily suspend its usual operation in order to perform other activities, such as handshaking. DLE is normally implemented to support synchronous communications and protocols such as High-Level Data Link Control (HDLC), which formulates messages as one long continuous stream of bits or bytes. By using DLE codes, it’s possible for both transmitting and receiving devices in the network to negotiate communication links before sending actual data.
DLE meaning in General in Computing
DLE mostly used in an acronym General in Category Computing that means Data Link Escape
Shorthand: DLE,
Full Form: Data Link Escape
For more information of "Data Link Escape", see the section below.
Purpose of Using DLE
The purpose of using DLE codes is mainly to detect and recover from errors during the data exchange over computer networks. When two devices communicate with each other using HDLC or any similar synchronous protocol, DLE codes can be used for a range of purposes, including error detection, control functions, synchronization between devices, and even initiating an uplink request in modem applications. For example, when sending a packet over a network that uses HDLC protocol, the transmitter may send out a frame start sequence comprised of two consecutive DLE codes followed by another control character called SOH (start of header). Upon detecting this combination of characters within received frames from network nodes, receivers can determine whether the message originated from the intended source device or if some sort of corruption occurred during transmission.
Advantages & Disadvantages
The main advantage of using the Data Link Escape code is that it allows fast detection and recovery from errors along with efficient control functions over communication links. The use of this technique also helps reduce redundant transmissions however; The downside to using this system is that additional overhead must be allocated for implementing these codes which makes them not universally adopted in all systems. So while they are beneficial in certain scenarios they may not be suitable for all applications involving network communications.
Essential Questions and Answers on Data Link Escape in "COMPUTING»GENERALCOMP"
What is Data Link Escape?
Data Link Escape (DLE) is a protocol that governs how data should be formatted and transmitted between two computers. It was developed by the National Aeronautics and Space Administration (NASA) to ensure data integrity and accuracy when communicating with spacecraft. This protocol ensures that all characters in a message are properly received and decoded by the receiving device.
What types of data does DLE support?
DLE supports a variety of data formats, including ASCII text, binary codes, and control characters like line feeds, carriage returns, and tabs. It also includes provisions for the transmission of images, video, audio signals, and other digital media.
How secure is DLE?
DLE is designed to provide reliable communication without compromising security or privacy. The protocol includes optional features such as encryption, authentication protocols, access control levels, and time-stamping to ensure communications are secure.
How does DLE work?
When transmitting data using DLE, each character is preceded by an escape code that indicates its type. The receiving device recognizes the escape code and interprets it as part of the data signal rather than as part of the communication channel's control information. This allows computers to communicate without requiring a common language or format for the transmitted data.
What is an example of an escape code?
An example of an escape code used in DLE is the octal byte sequence which begins “1B 1C” followed by three further octal bytes indicating the type of character being transmitted — text (0), image (2), video (3) etc. Another example is MEMO which triggers special functions such as starting/stopping transmission or requesting additional information from the receiving device before continuing transmission.
Is DLE used widely?
Yes, it has been adopted by many organisations around the world for mission-critical operations due to its reliability and security measures built into it. It can be found on spacecrafts communicating with NASA ground stations; in industrial robotics systems; in government networks used to transmit confidential financial information; in medical monitoring devices; in military communications; and more recently at home for Internet routing protocols such as DSL and cable modems as well as Wi-Fi routers.
Does DLE require certain hardware requirements?
Yes. All devices involved in transmitting/receiving must be compatible with the system architecture defined by NASA's standard - MIL-STD 830e (Data Link Protocol Standard). The physical link layer technologies should also comply with standard specifications such as 10 megabits per second Ethernet, FDDI fibre optic networks or various wireless network standards like IEEE 802a/b/g/n/ac.
Final Words:
Data Link Escape (DLE) provides reliable flow control over communication links allowing transmitters and receivers to negotiate connections prior to transferring data packets through HDLC Protocols or similar mechanisms. Its main advantage lies in its ability to detect and recover from errors quickly however; It has its disadvantages too due to increased overhead needed for implementation making it only useful in certain scenarios rather than all applications requiring network communications.
DLE also stands for: |
|
| All stands for DLE |