What does VG mean in ENGINEERING
VG stands for Various Girders. It is a term used in Structural Engineering to refer to a type of structural element that is used to support loads in buildings and bridges. Girders are typically made of steel or concrete and are designed to withstand bending and shear forces.
VG meaning in Engineering in Academic & Science
VG mostly used in an acronym Engineering in Category Academic & Science that means 1.Half-latticed girder 2.Hinged girder 3.Hinged cantilever girder
Shorthand: VG,
Full Form: 1.Half-latticed girder
2.Hinged girder
3.Hinged cantilever girder
For more information of "1.Half-latticed girder 2.Hinged girder 3.Hinged cantilever girder", see the section below.
Types of VG
There are three main types of VGs:
- 1. Half-latticed girder: This type of girder has a web that is made up of a series of diagonal members. The diagonal members are connected to the top and bottom flanges of the girder.
- 2. Hinged girder: This type of girder has a web that is made up of a series of vertical members. The vertical members are connected to the top and bottom flanges of the girder by means of hinges.
- 3. Hinged cantilever girder: This type of girder is similar to a hinged girder, but it has one end that is fixed and the other end that is free to move.
Essential Questions and Answers on 1.Half-latticed girder 2.Hinged girder 3.Hinged cantilever girder in "SCIENCE»ENGINEERING"
What is a half-latticed girder?
A half-latticed girder is a type of bridge girder that is constructed with a series of parallel chords connected by diagonal members. The chords are typically made of steel or concrete, while the diagonal members can be made of steel, timber, or concrete. Half-latticed girders are often used in the construction of bridges with long spans, as they are relatively lightweight and can be easily transported and erected.
What is a hinged girder?
A hinged girder is a type of bridge girder that is supported by piers or abutments at its ends and is free to rotate about a horizontal axis at one or both ends. Hinged girders are often used in the construction of bridges with multiple spans, as they allow for thermal expansion and contraction of the bridge deck.
What is a hinged cantilever girder?
A hinged cantilever girder is a type of bridge girder that is supported by piers or abutments at one end and is free to rotate about a horizontal axis at the other end. Hinged cantilever girders are often used in the construction of bridges with long spans, as they can be easily erected without the need for falsework.
Final Words: VGs are an important structural element that is used in a wide variety of construction projects. They are designed to withstand bending and shear forces and are available in a variety of types to meet the specific needs of each project.
VG also stands for: |
|
| All stands for VG |